Specifications For Linak - Leckey Horizon Manual Del Usuario

15 Customer – James Leckey

Specifications for LINAK

Products supplied
LINAK Actuator
343200-0020004X
Rated IP54
Duty Cycle: 2/18 – 2 minutes continuous
use followed by 18 min not in use.
Ambient temperature +5° to +40° C
Push Max 10,000N
Pull Max 6000N
Self Lock at 10,000N Push, 6000N Pull
Typical speed with full load 5mm/sec
Max amps at load of 6000N is 7 amps
Noise level below 50 dB (A)
Power input voltage 24v +- 10%
LINAK Control Box
CBJC0033-01
Rated IP: IP54
Duty Cycle Max 10% or 6 minutes per
hour followed by 18 min not in use.
Ambient temperature +5° to +40° C
Rated Capacity 2.9 Ah 24v
Lead acid gel filled battery
LINAK Handset
HD8X052-00
Rated IP54
Control current 100mA per channel (Max)
Ambient temperature +5° to +40° C
LINAK Battery Charger - CH01
Mains 100-240 VAC/50-60 Hz switch mode
power supply
Charging voltage 27.6 VDA +- 2%
Charging current Max 500mA
Green LED for power on
Yellow LED for charging funcion
Yellow LED turns into green when batteries
are fully charged.
Linak products may be stored in non-
heated storage facilities with humidity
between
0 and 100%, none condensing.
None condensing means that one should
not take a product an ice cold warehouse
into a room with a temperature of 20deg C;
if this is done then moistness will appear
on the products.