Publicidad
Idiomas disponibles
Idiomas disponibles
6.
Press and hold the
value will increase by 100 each time. When the
repeat the above operation. Note: The setting parameter cannot exceed the user-defined limit
(see table below), or else it will return to the initial value to start the loop.
7.
Press and hold the
Other parameters:
1.
In the real-time interface, press
2.
Click
or
3.
Press
for 2s to enter the configuration interface of the specified parameter.
4.
Click
or
5.
Press
for 2s to confirm the configuration.
6.
Click
+
button to increase the PSI value by 10. After adding ten times, the PSI
button to confirm.
for 2s to enter the parameter setting interface.
to select the parameter to be configured.
to configure the parameter value.
to exit the current interface.
button is released, press and hold it again to
Publicidad
