Publicidad
English
Scenario 2:
Wireless ISP hotspot access
1. Set up the CPE
Step1: Log in to the web UI of CPEs.
❶
Open the CPE cover and power it on (PoE injector used
for example).
❷
Connect your wireless client (such as a smartphone) to
the WiFi network of CPE or use an Ethernet cable to
connect the LAN port of the PoE injector to a computer.
By default, the WiFi name of CPE is Tenda_XXXXXX
(XXXXXX indicates the last six characters of the MAC
address). If a WiFi QR code is provided on the CPE
nameplate, you can scan it to connect to the WiFi
network directly.
CPE (Example: OS3)
❸
Start a web browser on the client connected to the
CPE and visit 192.168.2.1. Enter the login username
and password and click Login.
192.168.2.1
PoE injector
PoE
LAN
Computer for example
04
Publicidad
