Publicidad
Idiomas disponibles
Idiomas disponibles
...
Descaling
Prevent limescale forming on the equipment parts because the function is impaired
by lime deposits:
After 100 hours of operation, add citric acid and warm water to the drinking wa-
ter tank. Follow the instructions for use on the citric acid packaging.
Leave the solution to work for 2 hours.
Run the cleaning function 5 times.
Empty the water tanks as described above and then carry out a cleaning cycle
with fresh water. To do this, fill both water tanks up to the MAX mark.
After the rinsing cycle, empty the water tanks again and clean the appliance as
described above.
. Prolonged non-use/transport
If the equipment will not be used for a long period of time:
– pull the mains plug out of the socket
– defrost the appliance
– clean it
– drain residual water from the appliance
– leave the appliance open to prevent unpleasant odours forming and mould
growing
Store the almost completely dry appliance in a dry, dust- and frost-free location
out of direct sunlight.
To avoid damaging the product during transport, we recommend that you use
the original packaging.
DE
FR
NL
ES
IT
EN
127
Publicidad
