Victor 1208-2 Serie Manual De Instrucciones página 3

PREPARATION
A. Power Source
This unit receives its operating power from an AC adaptor 6V DC, 300mA or
4 AA size manganese dry batteries (UM-3). When power is in ON position,
pressing [#0] key will only print the digits displayed in the front display panel.
B, Loading Paper
1) Place paper holders into position (Fig. I).
2) Install the paper roll on the holders.
3) Insert the paper end into printer slot (Fig. II).
4) Press [ t ] key to feed the paper to an adequate length.
Fig. I Fig. II
C. Replacing the Ink Roller
If the printing becomes faint, the ink roller may need to be replaced.
1) Turn the power off.
2) Open the printer cover (Fig. III).
3) Remove the old ink roller by pulling it up (Fig. IV).
4) Insert the new ink roller IR-40T in the compartment and gently press it
down until it snaps into place.
Fig. Ill Fig. IV
CAUTION: Turn the power off before replacing ink roller.
E3
DISPLAY SYMBOL
MEMORY
ERROR
: A number has been stored in memory
: Error or overflow of capacity
: The display value is negative
DATE AND TIME FUNCTION
TIME/DATE: The TIME/DATE key is used to display the Time or Date.
Depressing the TIME/DATE key once displays the date MM-DD-
YYYY. Depressing the TIME/DATE key a second time displays
the time, HH-MM-SS.
SET:
When displaying the Date or Time the = key becomes a key to
enter or exit the date or time set mode.
12/24:
When displaying the Time the -i- key becomes a key to toggle
between the 12 (AM/PM) or 24 hour clock mode.
AM/PM:
When displaying the Time in the set mode the x key becomes a
key to toggle between AM and PM when in the 12 hour time mode.
FORMAT:
Used to select date format between "YYYY/MM/DD", "DD/MM/
YYYY" at calendar mode.
Sot Date and Time
1) Press TIME/DATE and then SET (The first digit of the month will flash)
2) Enter the month MM using the number keys. (The first digit of the date will
flash)
3) Enter the date DD using the number keys. (The first digit of the year will flash)
4) Enter the year YYYY using the number keys. (The first digit of the month will
flash)
5) Press SET to confirm the date.
6) Press TIME/DATE and then SET. Enter the time using the number keys and
press 12/24 to switch between 12-hour or 24-hour clock.
7) Press AM/PM to toggle morning or afternoon and press SET to confirm
the time.
E4