Publicidad
3.3.3 RCA Audio Out (Red/White ports labeled
AUX
SPDIF IN
SPDIF OUT
DC SV
After connecting the cable you should be able to hear sound from your headphones;
if not:
1) Ensure the AUX/SPDIF (Optical) switch on the TC417 is set to the "AUX" position.
2) Ensure using TV Red/White ports labeled
incorrect.
3) Ensure your TV Speaker setting is set to "External Speaker".
4) Plug headphone into RCA ports with AUX 3.5mm to RCA audio adaptor cable to
check if you can hear sound.
Fig 3-8 Use the right RCA ports
3.3.4 Receiver with 6.35mm Phone Jack at Front
AUX
NOTES:
1) Transmitter is NOT compatible with ANY RCA (L/R) ports on back of your AV Receiver, ONLY
use the BIG 6.35MM PHONE OUT on front side of your AV Receiver with the 6.35mm to
3.5mm adapter.
2) Do NOT set the volume too high.
3) Plug wired ear buds into the port to check the sound.
4) Ensure the AUX/SPDIF(Optical) switch on the TC417 is set to the "AUX" position.
4. Bluetooth Receiver (RX Mode)
4.1. Turn on the TC417:
light.
4.2. Set the TC417 to RX mode:
4.3. Enter the TC417 into PAIRING MODE:
button for 2 seconds to enter into pairing mode.
4.4. Connect the TC417 to Bluetooth audio source:
audio source and search for "Avantree TC417" - tap to connect. Once connected, LED
on the TC417 will turn SOLID
4.5. Plug the TC417 to wired speaker or sound bar
a) Optical audio input,
If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to "SPDIF" position.
b) AUX 3.5mm input,
If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to "AUX" position.
c) RCA audio input,
If no sound, ensure AUX / SPDIF (Optical) Switch on TC417 is set to "AUX" position.
5. After Use
6. Charging
RED
Connect to USB charger that supports 5V/500mA-2A using included Micro USB charging cable.
NOTES:
1) The TC417 supports charging during operation. However, if you plug in a USB charger
during
again and it will auto reconnect to the headphones.
2) While using the TC417, we do not recommend using a TV USB port for charging as it may
cause noise.
7. Clear pairing history
twice. Now all pairing history of TC417 is cleared and the TC417 will enter pairing mode, LED
GREEN
AUX
3.5mm to RCA audio cable
Fig 3-7 Set up Tc417 using TV RCA audio out
AUX
SPDIF IN
SPDIF OUT
DC SV
Fig 3-10 Set up TC417 using 6.35mm phone jack
Press and hold MFB button for 3 seconds until you see the
Slide TX/RX switch to "RX" position.
BLUE
refer to Fig 4-1 Set up TC417 as Bluetooth receiver option A.
refer to Fig 4-1 Set up TC417 as Bluetooth receiver option B.
refer to Fig 4-1 Set up TC417 as Bluetooth receiver option C.
TC417
AUX
SPDIF IN
SPDIF OUT
DC SV
AUX
SPDIF IN
SPDIF OUT
DC SV
Option
Optical cable
Fig 4-1 Set up TC417 as Bluetooth receiver
BLUE
"AUDIO OUT"
AUDIO OUT
"AUDIO OUT"
Fig 3-9 Set TV speaker to "External Speaker"
PHONES
PHONES
6.35mm to
3.5mm Converter (
3.5mm audio cable
BLUE
Activate Bluetooth on your Bluetooth
.
Speakers optical
Input
A
Option
B
AUX cable
Option
C
AUX 3.5mm to RCA audio cable
- 2 -
)
AUDIO OUT
; other Red/White ports are
Speakers
Internal speakers
External speakers
Headset
purchase separately
TC417 will enter pairing mode
Speakers
Speakers RCA
Speakers AUX
Input
Input
RED
)
BLUE
RED
Publicidad
