Melchioni Family SUN Manual De Instrucciones página 24

The control panel buttons:
Button Function
Start/stop
Blade speed
Head swing
Timer shut-
down
Lamp
activation
The same buttons are replicated with the same functions on the remote control.
Pressing each button activates the corresponding function, considering that it is
possible to switch from the fan function (lamp off) to the heater function (lamp on)
but not vice versa, since the lamp cannot be instantly cooled. Therefore, it is necessary
to turn the appliance off and wait for the lamp cooling time, at minimum rotation
speed (about 20 seconds). Then, once it has fully stopped, activate the fan.
The LED indicator lights:
Indicator
light
Alternately starts and stops the appliance
When pressed in sequence, they cyclically modify the
blade rotation speed, alternating between minimum,
low, medium and high
Alternately starts and stops the horizontal swing
function of the grille/blade/motor unit
Each press adds one hour to the time after which the
appliance automatically switches off
When pressed in sequence, it cyclically changes the
halogen lamp status, alternating between partial
power-on, total power-on and power-off
Marking
Power supply / Activation
Head swing
Partial lamp power-on
Total lamp power-on
Minimum blade rotation speed
Slow blade rotation speed
Medium blade rotation speed
Fast blade rotation speed
Power-off timer
23
Use
Colour
Red
Blue
Blue
Blue
Blue
Blue
Blue
Blue