Refco REFSCALE-S Manual De Instrucciones página 16

Hold function
A special function of the REFSCALE-S allows you to freeze the
value. This function can be used, for example, when filling or
emptying the system when the gas cylinder is empty or full.
The function is activated by briefly pressing
appears on the display.
To deactivate the function, press again
Alarm
With the REFSCALE-S a programmable alarm value can be set.
The alarm will sound when the required value (either positive for
increasing weight, or negative for decreasing weight) is reached.
After 90% of the programmed value, an approaching alarm
brings to your attention, with an alternating tone, that the
required amount is nearly reached. When reaching 100%, a
continuous tone sounds.
1. press
2. press
3. press
4. press
5. press
6. press
triggered
7. press
Instruction Manual
, enter the menu
, navigate to alarm
, confirm
, «SET» is displayed
, confirm «SET»
, define the value at which the alarm should be
, confirm value
and the symbol
.
15