Publicidad
Idiomas disponibles
Idiomas disponibles
4.
press
activated)
5.
press
Tank Capacity
It is often convenient to know the relative amount of gas
remaining in a gas cylinder (tank). The REFSCALE-S Tank
Capacity Mode allows a continuous display of the percentage of
gas remaining in a tank. In order to compute the percentage
accurately, the REFSCALE-S must be trained with the weights of
an empty and full tank. To train the REFSCALE-S Tank Capacity
Mode, perform the following steps:
1.
press
2.
press
3.
press
4.
press
5.
press
6. The display shows 0%, indicating that the weight of an empty
container needs to be registered.
Place an empty gas cylinder (or a load equal to the weight of
an empty gas cylinder) on the platform. Wait 5 seconds for
the load to stabilize.
7.
press
8. The display shows 100%, indicating that the weight of a full
cylinder needs to be registered.
Place a full gas cylinder (or a load equal to the weight of a full
gas cylinder) on the platform. Wait 5 seconds for the load to
stabilize.
Instruction Manual
, navigate to
, confirm «sound activated»
, to enter the menu
, navigate to Tank Capacity
, confirm
, navigate to «SET»
, confirm
, confirm
(sound
17
Publicidad
