PNI SafeHouse HS291 Manual Del Usuario página 8

"OFF LINE" will be briefly displayed on the screen. Press
the "+" key again for 5 seconds. The network icon will blink
infrequently (once per second). The countdown appears
on the screen for 3 minutes*. The device is now in pairing
mode.
• Press "Next" in the following interface.
• Enter the WiFi network password (2.4 GHz).
• After your device has been identified, press "Done"
to complete the procedure of adding the sensor to the
application.
• The message "ON LINE" appears briefly on the device
screen. The network icon remains lit.
*If in this 3-minute interval you do not manage to pair the
device with the application, repeat the procedure after the
message "OFF LINE" appears on the screen.
8