Avantree TWS116 Manual De Usuario página 3

Connecting to a Phone / Tablet / TV
For rst time use, please put both earphones onto the
charging case then
1. Remove BOTH earphones to turn them ON
2. Wait for the LED on either earphone to ash
alternately to enter PAIRING MODE
3. Search & select Avantree TWS116 from the Bluetooth
menu on your device to connect. If you are using a Bluetooth
transmitter, please ensure your transmitter is also in
PAIRING MODE (please refer to your user manual)
4. Once connected, both earphone LEDs will ash once every
8 seconds
Notes:
1. If your TV is not Bluetooth enabled, you will need to buy a
separate Bluetooth transmitter (we recommend either the
Avantree Oasis (Plus) / Audikast)
2. If you use your TV's optical audio output, you may need to
set your TV audio format to PCM (please refer to your
transmitter's user manual)
Reconnecting
The earphones will auto-reconnect to your last paired device
the next time you remove them from the case. If not, please
select Avantree TWS116 on your device to manually reconnect.
Note: To connect with another device, please turn o Bluetooth
on the previously connected device
User Tips and troubleshooting
Use one earphone only
Either side can be used separately as a mono earphone.
1. Make sure you have previously connected the earphones with
your phone as a TWS pair rst
2 For subsequent use just remove either earphone from the
BLUE RED
&
EN