Be Cool BC16SF Instrucciones De Uso página 119

1. Insert the telescopic rod into the stand and fix it with a sealing ring and a fixing
screw.
2. Connect the motor part to the telescopic rod and tighten it with a fixing screw.
3. Take the rear protective grille and place it on the motor shaft. Then fix it with a
threaded nut.
4. Take the fan blades and put them on the motor shaft. Then fix them with a
fastening ring.
5. Take the front protective grille and insert it to match the rear protective grille. Fix
both grilles together with the help of fastening clips.
COMMISSIONING
1. Place the unit on a flat and dry surface.
2. Insert the plug into a standard 230V socket.
3. Set the desired speed.
You can choose between:
4. To switch off the unit, press "0".
5. For the swivel function, press the oscillation button on the motor housing in. If you
want to switch off the function, pull the button upwards.
6. To change the angle of the airflow, move the head forward or backward.
1
1
2
3
Page 119 from 121
OFF
Low speed
Medium speed
High speed