Kenwood KDC-MP102U Manual De Instrucciones página 5

When you press or hold the following button(s)...
Remote
Main unit
controller
—
SRC
SRC
VOL
Volume knob
5 / ∞
(turn)
ENT
Volume knob
(press)
—
5 / ∞
(BAND)
AM– /
*
#FM+
1 (–) / 2 (+)
6 ( ) ENT
4 / ¢ 4 / ¢
SCRL DISP —
AUDIO AUD
— ATT
EXIT
Discs that cannot be used
Discs that are not round.
Discs with coloring on the recording surface or discs that
are dirty.
You cannot play a Recordable/ReWritable disc that has
not been finalized. (For the finalization process refer
to your disc writing software, and your disc recorder
instruction manual.)
3-inch CD cannot be used. Attempt to insert using an
adapter can cause malfunction.
Turns on.
Turns off if pressed and held.
Selects the available sources (TUNER, USB, CD, AUX, STANDBY), if
the power is turned on.
• If the source is ready, playback also starts.
• "CD" is selectable only when a disc is loaded.
Adjusts the volume level.
Selects items.
Confirms selection.
Enters [FUNCTION] settings.
Enters Music Search mode.
Selects the FM bands (FM1/ FM2/ FM3) or AM when "TUNER" is
selected as the source.
Selects the previous/next folder.
Pauses/resumes playback of a disc/ USB device.
Searches for radio station.
+
Selects track/file.
Fast-forwards/reverses tracks if pressed and held.
Changes the display information.
Scrolls the display information if pressed and held.
Enters clock adjustment mode directly (page 6) if pressed and
held while in clock display screen.
Enters [AUD CTRL] settings directly. (page 10)
Attenuates the sound.
• To return to the previous level, press the button again.
Returns to the previous item.
Exit from setting mode. (Press and hold
also exit from the setting mode.)
General operation
About USB device
This unit can play MP3/WMA files stored on a USB mass
storage class device.
Install the USB device in the place where it will not
prevent you from driving your vehicle properly.
You cannot connect a USB device via a USB hub and
Multi Card Reader.
Make sure all important data has been backed up to
avoid losing the data.
Connecting a cable whose total length is longer than 5 m
can result in abnormal playback.
on the main unit will
5