Pyle PHSKR28 Manual Del Usuario página 6

System Setup
Rating
When playing a disc with a locking function, select
the suitable play control rating. This setup can only
be carried out when the password lock is off.
Remember to switch the password lock back on
after you have completed the setup so that the
rating restrictions can be applied.
RESUME
RESOLUTION
Default
Enter Default】 option, press ►】 key to select
"Restore" and press Enter] key, so each setup
will restore to factory default automatically.
RESUME
RESOLUTION
II. Language Setup
The setup operations are as follows:
OSD Language
Enter the OSD Language】 option, press
key to enter the sub-menu and select the interface
display language you want.
Audio Language
Enter the Audio Lang】 option, press
to enter the sub-menu and select the audio
language you need; ensure that the disc you wish
to play has the required capability.
Subtitle Lang
Enter the Subtitle Lang】 option, press
to enter the sub-menu and select the subtitle
language you want; ensure that the disc you wish to
play has the required capability.
Menu Lang
Enter the Menu Lang】 option, press
to enter the sub-menu and select the menu
►】
language you need; ensure that the disc you wish
to play has the required capability.
9
System Setup
III. Audio Setup
The setup operations are as follows:
►】 key
Audio Out
Enter the Audio out】 option, then press
key to enter the sub-menu to select the audio out
mode.
HDMI AUDIO
KEY
HDMI Audio
Enter the 【HDMI Audio】 option and press 【►】
key to enter the sub-menu. You can select: AUTO or
►】 key
PCM.
HDMI AUDIO
KEY
Key
Enter the Key】 option, press
►】 key the sub-menu, then use the direction keys "Up" or
"Down" to adjust the key volume.
HDMI AUDIO
KEY
IV. Video Setup
The setup operations are as follows:
Brightness
Enter the【Brightness】option, press【►】key to
►】
enter the sub-menu, then use the direction keys
"Up" or "Down" to adjust brightness parameters.
SPDIF/PCM
SHARPNESS
Contrast
Enter the【Contrast】 option, press 【►】 key to
enter the sub-menu, then use the direction keys
"Up" or "Down" to adjust contrast parameters.
AUTO
PCM
SHARPNESS
►】 key to enter
Hue
Enter the【Hue】 option, press 【►】key to enter
the sub-menu, then use the direction keys "Up" or
"Down" to adjust hue parameters.
#
+4
+2
0
-2
-4
SHARPNESS
b
10
+6
+4
+2
0
-2
-4
-6