Publicidad
Idiomas disponibles
Idiomas disponibles
2. Adding the pet food
Add the dry pet
food into the
1
food tank.
3. Connecting to the power supply
As the following figure shows, connect the Smart Pet Feeder to the DC power supply
using the included power adapter and USB cable. To keep the uninterruptible APP
control in the event of grid power failure, the backup battery power is required.
Once the Smart Pet Feeder connects to the power supply, it will turn on automatically,
and the LED indicator will flash blue rapidly.
AC power source
AC/DC
power
adapter
(Included)
Backup Battery power: Open the battery cover, then
batteries according to the direction indicated in the battery compartment.
Note: When the Batttery power level is low, the LED indicator will glow red.
2
Note:
For best feeding
results, ensure the
sizes of the pet food
pellets are within
5-10mm/0.12-0.4 inch
in diameter.
DC power
Input Jack
USB cable
(Included)
EN 2
Close the lid and lock
the lid firmly with the
included Safety Lock
velcro.
Battery cover
insert four "AA,1.5V" sized
Safety Lock velcro
Publicidad
