Publicidad
Idiomas disponibles
Idiomas disponibles
Adding device
Follow these steps to add the Smart Pet Feeder to the App.
1. Turn the Smart Pet Feeder on. Make sure the LED indicator is flashing blue quickly,
your phone is connected to your home Wi-Fi network (2.4G), and your phone's Blue-
tooth is on.
2. Launch the RCA Smart Home app and tap Add Device or tap
device on the home screen; it will automatically search for nearby devices. If the device
is found, tap "Add"to enter the network connection screen..
If the device cannot be found, you can reset the WiFi network by pressing and holding
Manual Feeding/WiFi Reset button for 10 seconds until the LED indicator flash blue
quickly. Or reset the Smart Pet Feeder by switching its power off-on, then tap Add
Device or tap the icon
3. Select your 2.4G Wi-Fi network name and enter the password, then tap Next to proceed.
Note: Your phone and app must be connected to the same Wi-Fi network.
4. Wait until the icon
the "Added." and the icon
complete.
My Home WiFi
*******
to retry.
appear, and tap "Next", then the blue light stops flashing,
appear on the screen to indicate that the connection is
EN 4
the icon
> Add
Publicidad
