WERKU WK401620 Instrucciones Originales página 2

CE DECLARATION CONFORMITY.
Werku declares that the WK401620 cordless
®
►
grinder is in accordance with the European
Directives and Standards 2006/42/CE, 2014/30/
EU, EN60745-1:2009+A11:2010, EN60745-2-
3:2011+A2:2013+A11:2014+A12:2014+A13:2015,
EK9-BE-77 (V3):2015, EK9-BE-88:2014,
EK9-BE-89:2014, EK9-BE-91:2015, EN55014-
1:2006/+A1:2009/+A2:2011 and EN55014-2:2015.
La Coruña, 01/10/2020
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency 230V~50Hz
►
20V max 4.0 AH Li-ion
2.5 h Speed rate 8500 min
►
115/125x22mm Axis measure m14
►
pressure LpA <83 dB(A)
KpA 3 dB(A) Acoustic power LwA <94 dB(A)
►
Respective uncertainity KwA 3 dB(A)
►
Ah <4,23 m/s² Respective uncertainity Kh 1.5 m/
►
The declared vibration total value has been
s²
►
measured in accordance with a standard test method
and may be used for comparing one power tool with
another The declared vibration total value may also
►
be used in a preliminary assessment of exposure
Warning; the vibration emission during actual use
►
can differ from the declared total value depending
on the ways in which this cordless drill is used
Warning; please identify safety measures to protect
►
the operator, based on an estimation of exposure in
the actual conditions of use.
SAFETY INSTRUCTIONS.
Read all security warnings and all instructions
►
Failure to follow all warnings and instructions listed
►
below may result in electrical shock, fire and/or serious
injury Keep all warnings and all instructions for future
►
reference Accidents can be avoided in many cases by
►
recognizing a potentially hazardous situation before it
occurs and by observing appropriate safety procedures
Do not use this cordless grinder for other applications
►
than those specified in this manual.
WORK AREA SAFETY.
Keep work area clean and well lit
►
and dark areas invite accidents
power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dusts
Battery
►
Battery charge
►
Disc measures
-1 ►
Acoustic
►
Respective uncertainity
►
Vibration
►
Cluttered
►
Do not handle
►
Keep away from children and curious while
►
operating a power tool
you to lose control.
PERSONAL SAFETY.
Stay alert, watch what you are doing and use
►
common sense when operating a power tool
not use a power tool while being tired or under
the influence of drugs, alcohol or medicines
moment of inattention while operating power tools
may cause damage serious personal damage.
USE PPE'S.
Use protection glasses according EN166
►
protection masks according EN149
the type of work, use other precise PPE.
DO NOT WORK ON TIPTOES.
Keep your feet on the ground and balance at all
►
times This enables better control of the power
►
tool in unexpected situations.
DRESS PROPERLY.
Do not wear loose clothing or jewelry
►
your hair, clothing and gloves away from moving
parts Loose clothes, jewelry or long hair can be
►
caught in moving parts
connecting means for extracting and collecting
dust, make sure they are connected and properly
used The use of these devices can reduce dust
►
related hazards.
ELECTRICAL SAFETY.
Hold this cordless impact-driver drill by insulated
►
gripping surfaces, when performing an operation
where the drill bit may contact a hidden wiring
A drill bit contacting a "live" wire may make
►
exposed metal parts of this cordless impact-driver
drill "live" and could give the operator an electric
shock The plug of the power tool must match
►
with the base of the socket
plug in any way
with earthed power tools
matching bases will reduce the risk of electric
shock Avoid body contact with grounded
►
surfaces such as pipes, radiators, cookers and
refrigerators
electric shock if your body is grounded
expose power tools to rain or wet conditions
Water entering the power tool will increase the
►
risk of electric shock.
2
English
Distractions can cause
►
If there are devices for
►
Never modify the
►
Do not use any adapter plug
►
Unmodified plugs and
►
There is an increased risk of
►
Do
►
A
►
Use
►
If required by
►
Keep
►
Do not
►