WERKU WK401620 Instrucciones Originales página 3

DO NOT ABUSE THE CORD.
Never use the cord to carry, lift or unplug the
►
power tool Keep the cord away from heat,
►
oil, sharp edges or moving parts
entangled cords increase the risk of electric shock
When operating a power tool outdoors, use an
►
extension cord suitable for outdoor use
use of an extension cord suitable for outdoor use
reduces the risk of electric shock
power tool in a damp location is unavoidable, use
a power protected by a residual current device
(RCD) The use of an RCD reduces the risk of
►
electric shock.
AVOID ACCIDENTAL STARTING.
Make sure the switch is in "off" position before
►
connecting to the network, or when taking or
carrying the power tool
with your finger on the switch or plugging in
power tools that have the switch in "on" position
invites to accidents
►
before starting the power tool
attached to a rotating part of a power tool can
cause personal injury.
USE AND CARE OF POWER TOOLS.
Do not force the power tool
►
power tool for your application
power tool will do the job better and safer at the
rate for which it was conceived
power tool if the switch cannot be positioned
to "off" and "on" position
cannot be controlled with the switch is dangerous
and must be repaired
the power supply and/or battery before making
any adjustments, changing accessories or
storing the power tool
measures reduce the risk of starting the power
tool accidentally.
STORE POWER TOOLS.
Store power tools out of reach of children and
►
do not allow the handling of power tools to people
unfamiliar with the tools or these instructions
Power tools are dangerous in the hands of
►
untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding,
►
there are no broken parts or other conditions
that may affect the operation of power tools
Damaged or
►
The
►
If the use of a
►
Carrying power tools
►
Remove keys or tools
A left key or tool
►
Use the correct
►
The correct
►
Do not use the
►
Any power tool that
►
Remove the plug from
►
Such preventive safety
►
Power tools are repaired before use when
►
they are damaged
by poorly maintained power tools
tools, accessories and tool tips, etc. according
to these instructions and in the manner provided
for the particular type of power tool, taking into
account the conditions work and work to develop
The use of the power tool for applications other
►
than those intended could result in a dangerous
situation Please check your power tool serviced
►
by a Werku
®
identical replacement parts
safety of the power tool is maintained.
CHECK THE GOOD CONDITION OF THE
CORDLESS GRINDER.
Make sure that all the screws in the cordless
►
grinder are perfectly tightened
or when the cordless grinder has not been used
for a period, allow the cordless grinder to warm
up by leaving it to run empty for a few minutes, to
ensure that all internal components are perfectly
lubricated
►
accessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the cordless grinder is firmly
►
supported before using
standing beneath you when using the cordless
grinder in high areas
from all moving parts of the cordless grinder.
DURING THE OPERATION.
Do not leave the cordless grinder operating without
►
having it firmly fixed
sure you have full control over it
cordless grinder at anyone while in use
operating the cordless grinder will produce vibrations
The screws may gradually come loose, and possibly
►
cause faults or accidents
from all moving parts of the cordless grinder.
AT FINISH WORKING.
Do not touch the possible accessories installed
►
in the cordless grinder after use
and cause burns
may contain chemicals or toxic components
Avoid inhaling these substances or allowing
►
them to come into contact with your skin
PPE designed to prevent and protect against
incidents of this kind.
3
English
Many accidents are caused
►
official repair service using only
This will ensure the
►
In cold climates
►
Make sure that the possible installed
Check that no one is
►
Keep your hands away
►
Only turn it on when you are
►
Do not point the
►
Keep your hands away
►
►
Some materials worked with
►
Use power
►
When
►
It may be hot
Use
►