Buffalo 600 Serie Manual De Instrucciones página 7

Thermal Cut-out Reset
The appliance is fitted with a Thermal Cut-Out safety switch. Should the temperature exceed safe levels
the appliance will automatically cut off power.
The thermal Cut-out switch is located on the front of the unit. To reset the appliance after a sufficient
cool-down period:
1. Unscrew the reset switch cover.
2. Press the small reset switch down until it clicks, using a blunt pointed instrument.
3. The appliance is now reset and can be used as normal.
Cleaning, Care & Maintenance
The appliance should be cleaned after each day's operation; however it may require
cleaning more often, depending on the volume of grilling carried out.
Do not use any abrasive cleaning agents on the appliance.
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely
difficult to remove. To prevent this, follow the cleaning steps below:
1. Always turn OFF the appliance and disconnect from the power supply before cleaning.
2. Allow the appliance to cool before cleaning.
3. If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured
and re-seasoned.
Warning: It is vital that the cooking surface is re-seasoned after scouring. Do not use steel
wool as it may leave shards that could Contaminate food.
4. Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
5. Dry thoroughly after cleaning.
Clean the waste tray
• This appliance features a waste tray to collect any liquid or fats that run off during cooking.
• At least once a day, remove and empty the waste tray before washing with warm, soapy water.
• Do not allow the tray to overfill, or excess grease will run out of the overflow hole at the front of the
tray.
Warning: Do not remove the waste tray during or immediately after use as the contents
will be hot.
Technical Specifications
Note: Due to our continuing program of research and development, the specifications herein may be
subject to change without notice.
Model Voltage
CU473
230V 1N~,
CU474 50-60Hz
CU475 400V 3N~,
50-60Hz
Model
CU473/CU474/CU475/CU475-E
CU473-E/CU474-E
CU473-CU474-CU475_ML_A5_v2_20240202.indb 7 CU473-CU474-CU475_ML_A5_v2_20240202.indb 7
Power Temperature
(Max.) Range
3kW 50ºC - 300ºC
4.5kW 50ºC - 300ºC
Plug type
N.A.
CEE 7/7
Product
Cooking Surface
Dimensions
Dimensions (mm)
h x w x d (mm)
396 x 410 240 x 400 x 600
596 x 410 240 x 600 x 600
EN
Net
Weight
24.1kg
35.1kg
7
2024/2/2 17:05 2024/2/2 17:05