Descargar Imprimir esta página

ATOMSTACK R30 V2 Manual De Instalación página 17

Módulo láser

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Installation Guide
Step 5: Adjust the focal length
01.
Ensure that the tested object is placed
flat before focusing (including the test
platform and the material itself)
02.
Put down the focus pole so that the
focus pole just contact to the carved
object to determine the focal length
03.
Tighten the handle to lock the laser
04.
Take back the fixed focus pole
05.
Fix focus completed
06.
Engraving parameters refer to the
parameter table
15
180

Publicidad

loading