Publicidad
Idiomas disponibles
Idiomas disponibles
K. Pumping device
L. Tube
M. Bottle lid x2
03. DISPLAY ICONS
SEE FIG. 2
1. Power button (G) – Hold the button for 2 seconds to turn the device on
or off.
2. Mode change button (E) – Press the button to change the operating mode
of the device. There are 3 operating modes of the device (stimulation,
expression, let-down). The device will automatically switch from stimulation
mode to expression mode after 2 minutes.
3. Change the suction level – Press + (F)to increase the suction or – (J) to re-
duce it.(Stimulation mode (A): L1-L5; Expression mode (B): L1-L9; Let-down
mode (C) : L1-L5).
4. Battery status (D) – The battery icon shows the battery status. Connect the
device to power when the battery is close to being discharged.
5. Session duration (I) – This indicates how many minutes have passed since
the breast pump was switched on. The device will automatically turn off
after 30 minutes.
6. Suction level (H) – Shows the currently selected suction level.
04. BEFORE FIRST USE
SEE FIG. 3
1. Connect the pumping device to a power supply. Charge your device's battery
for 2 hours.
2. Disconnect the breast pump components that will come into direct contact
with a breast or milk.
3. Unscrew the milk bottle from the connector.
4. Pull the valve down to disconnect it from the connector.
5. Remove the cover from the breast shield and pull the breast shield off the
connector.
6. Remove the suction cap and suction bowl from the connector.
7. Wash the device components (see CLEANING AND DISINFECTION section).
05. CLEANING AND DESINFECTION
Cleaning and sanitizing are two different activities. They must be done separately to
protect your child and ensure that the breast pump works properly.
Cleaning - washing the surface of the device and removing dirt.
Desinfection - killing organisms such as bacteria or viruses that may be present on
the Surface of the device.
14
Publicidad
