Publicidad
Idiomas disponibles
Idiomas disponibles
Class 1 or Class 2 Tie Off
►
►
12.0 INSPECTION
The user must keep instructions available for reference and record the date of first use
on Page 2.
The user must immediately remove the system from service if defects or damage are
found, if visual fall indicator is deployed, or if exposed to forces of fall arrest.
Work Area:
• Inspect the work area to ensure the location is free of any damage including, but
not limited to, debris, cracking, rot, decay, structural deterioration, rust, and any
hazardous materials.
• A Competent Person must determine that the installation location to be utilized will
support the intended loads.
Frequency:
• A Competent Person, other than the user, must inspect the Lodestar at least once
annually.
• While conducting inspections, the Competent Person must consider all
applications and hazards that the equipment may have been subjected to while in
use.
• Competent Person inspections must be recorded in the Inspection Log included
in this manual (Page 24), as well as the inspection table labels on each product
individually. The Competent Person must place their initials in the block which
corresponds with the month and year that the inspection is performed. All
individual labels on the equipment will be initialed in the same manner.
• See Table 4 for more information regarding inspection frequency requirements.
FIGURE 5: SYSTEM CONNECTION
A
FALL-ARREST
V3. 2023 Copyright Safewaze: 220-00109
Class 2 ONLY Tie Off
19
Publicidad
