Haden HB03010-US Manual De Instrucciones página 12

CLEANING THE BLENDER
Pour a little warm soapy water into the Jug and secure the lid.
•
Turn the Control to the "1" position and press down the Pulse
•
button without releasing it for a few seconds.
Remove the jug from the motor unit.
•
• Pour out the soapy water.
Dismantle the jug by unscrewing the blade assembly from the
•
base. The blade assembly lift away, finally remove the jug base
seal ring.
Detach the measure cup from the lid.
•
Clean all these parts (jug, blades, lid, seal rings and measuring
•
cup) in warm soapy water and rinse under running water.
Wipe the outer surface of motor unit and with a damp cloth.
•
NOTE: Do not use abrasive cleanser and never immerse motor unit
in water for cleaning.
Dry all parts and then assemble them.
•
• Reinsert the sealing ring into the blade assembly. The blade
assembly can be inserted back into the blender jug and turned
clockwise to secure.
NOTE: If any problem has been encountered during using, never
disassemble the Motor Unit by yourself. There are no user
serviceable parts inside.
12
www.hadenusa.com