Publicidad
Idiomas disponibles
Idiomas disponibles
Warnings
•
The PNI lamp with solar power has a built-in light sensor. Thus, the lamp
will automatically turn on in the evening and turn off in the morning.
•
To ensure that the light sensor works correctly, position the solar lamp at a
distance of at least 1.5 meters from other light sources.
•
When choosing the place to install the solar lamp, make sure that the built-
in solar panel is exposed to the sun as many hours a day as possible (at least
4 hours/day).
•
The lighting duration of the solar lamp depends on the geographical
position, the weather and the season. During the winter or on cloudy days,
the battery will not be fully charged, thus influencing the brightness and
duration of the lamp's illumination at night.
•
We recommend installing the solar lamp at a height of at least 1.6 meters
from the ground.
Installation
•
First choose the installation place of the lamp. Before final installation, test
first at night if the lamp illuminates where and as you want.
•
Make two holes in the wall at a distance of 120 mm from each other on a
horizontal line.
•
Insert the dowels into the two holes first, then the screws, leaving
approximately 5 mm outside.
•
Fix the solar lamp in the two screws.
User manual
3
English
Publicidad
