Publicidad
Idiomas disponibles
Idiomas disponibles
Before the first use
Before putting the lamp into operation, fully charge the built-in battery:
•
Move the ON/OFF button on the back of the lamp to the OFF position.
•
Leave the lamp in full sun for a day.
•
After the battery is fully charged, move the ON/OFF button to the ON
position.
•
The lamp will automatically turn on in the evening and turn off in the
morning.
Replacing the battery
The solar lamp includes a 600mAh 1.2V Ni-MH AA battery.
•
Remove the lamp from the place where it is installed.
•
Undo the two screws to remove the cover from the back of the lamp.
•
Remove the old battery and replace it with a new one.
•
Put the cover back and fix it with screws.
English
4
User manual
Publicidad
