FEEDER BASKET (13)
The feeder basket can be removed and re-attached facing guides and making a slight movement
until it stops (Figure 1).
FEEDER BASKET DOOR (14)
The feeder basket has an easy-to-open door to make it easier to fill the basket up with oranges
(Figure 1).
POWER CABLE (15)
When you receive the machine, you must connect the cable to the machine base (Figure 1).
CABLE PROTECTOR with 3 screws (16)
Fit to prevent the cable from being accidentally removed (Figure 1).
SS/TANK TRAY GASKET 6.3 x 3.5 (17)
If required, this gasket can easily be removed for cleaning and fitted back in by hand (Figure 1).
TRAY BOLT (18)
This component only has to be handled if a spare SS Juice container (40) or Tank juice container (50)
is requested (Figure 1). After inserting the spare container, adjust the bolt from the rear to adjust
the container position.
PEEL BUCKET (20)
Place the peel buckets under the side outlets of the cover (Figure 2 or 3 depending on model).
DRIP TRAY (21)
Place under the juice outlet (Figure 2 or 3 depending on model).