ANEXO SPEED PRO Manual De Usuario página 39

TANK SUB-FILTER (51)
Place on the inside of the juice extraction container (Figure 5).
TANK/COOLER BUOY (52)
TANK MODEL
Line up the lugs of the buoy support with the holes on the lid and screw the nut (Figure 16.1)
Insert the buoy and place the lid on the tank (Figure 16.2 and 16.3).
The BUOY unit can be detached as indicated in Figure 17 for cleaning.
COOLER or TANK MODEL
Slacken the upper lugs. Line up the plate with the openings from below. Tighten the upper
lugs again (Figure 19).
TANK (53)
Use the thread to secure the Self Service tap to the Tank container. Make sure that it is in
upright position (Figure 18.1).
TANK TAP (55)
Use the thread to secure the Self Service tap to the Tank container. Make sure that it is in upright
position (Figure 18.1).
The Tank tap can work continuously or discontinuously. Just turn the handle 180º and it will be
locked when the handle is lowered, thus permitting free spout.
For cleaning, you can remove the upper part of the Self Service tap (Figure 18.2).
LEVEL DETECTOR (56)
This component only needs to be manipulated if a spare part is requested. Remember to place the
detector in the same position as the original detector. If you have a Tank machine, the detector
is located in the upper part; if you have a Cooler machine, it is located in the lower part (Figure 5
and Figure 6).
39