KSIX ODISSEY Manual De Uso página 2

2.2 How to pair the headphones
Turn the headphones on as shown previously. When you do
so, the blue and red pairing lights will start to flash
alternatively, this means that the device is in pairing mode.
Activate the BT on your device, search for "KSIX ODISSEY" on
the available BT devices list and select it. Once the
connection has been successful you will hear a special
sound. Once the headphones have been connected to a
device, they will pair with it automatically when turned on.
Troubleshooting: If the headphones do not turn on
automatically, it should be due to low battery. Please, charge
the headphones. If they do not pair with your device
properly, reset the headphones as instructed later in this
manual.
2.3 Usage method
Play/Pause
Volume -/+
Previous/Next
song
Answer/Hang
up calls
Reject calls
Call last
number called
NC button
2.4 How to reset the headphones
To reset the headphones, disconnect them, access your
device's BT settings, tap on "KSIX ODISSEY" and then on
unpair. Turn them on again and repeat the pairing process.
There is another way to reset the headphones. When the
headphone is disconnected, press the multi-function
button 6 times to reset the headphone. After the reset, the
headphone shuts off automatically.
2.5 Charging the headphones
These headphones incorporate a USB-C port. Connect the
cable that is included in the package or a compatible cable
to a wall charger, powerbank or computer output.
It takes about 3 hours to charge the headphones up to full.
Troubleshooting: If the headphones LED indicator does not
turn on during its charge, it should be due to a power supply
issue. Please, check if the charging cable is correctly
connected to the charging case. Check both ends of the
cable, as well as the power supply state and the device you
are using to charge, whether it is a wall charger, a
powerbank or a PC port.
3. Safety, maintenance and usage
recommendations
Tap power switch once to play or
pause the music.
To decrease the volume, tap
once the volume down button.
To increase the volume, tap once
the volume up button.
To play the previous song, 2
seconds long press the volume
down button once.
To play the next song, 2 seconds
long press the volume up button
once.
To answer an incoming call,
press the power button once.
To hang up, press the power
button once.
To reject an incoming call, long
press the power button for 2
seconds.
Quick tap twice power button to
redial last number.
Tap NC button once to activate
ANC on or off.