dali RUBIKORE 2 Manual página 8

but be positioned parallel with the rear wall (see Figure 2). Parallel positioning
reduces distortion in the main listening area and improves room integration. The wide
dispersion principle also ensures that the sound is spread evenly within a large area
in the listening room.
3.1 DALI RUBIKORE 6 and 8
These loudspeakers are designed to stand on the floor, using the supplied Premium
Spike Set or rubber bumpers under the loudspeakers (see Figures 3 and 4). Be
careful not to overtighten the contra nuts. Spikes or rubber bumpers can improve
the sound quality. You can try both to hear what gives the best sound quality in your
setup. Please note that spikes may damage the floor if it is not protected.
NOTE: On some floors and in some rooms, the use of spikes is a crucial aspect in
obtaining the best result. The spikes (included) should be fastened loosely in the
aluminium feet, leaving the spikes' nuts only slightly tightened. Using the screws,
mount the aluminium feet in the threaded holes on the bottom of the loudspeaker.
Push the feet against the loudspeaker cabinet before tightening the screws. Place
the loudspeaker with the mounted spikes upright on the floor, so that it stands
steadily without rocking. Tighten the nuts, so that the four spikes sit tightly in the
aluminium feet. These assembly and setup steps ensure stable mechanical coupling
to the surface beneath (see Figure 3).
3.2 DALI RUBIKORE 2
DALI RUBIKORE 2 is optimised for stand mounting, but will also work well on a shelf.
If positioned on a stand or shelf, the enclosed bumpers can be placed under the
loudspeaker for stable and vibration-free positioning (see Figure 4).
For the best possible sound, we recommend placing the loudspeakers with the
tweeter modules at approximately the same height as your ears when you are seated
in your favourite listening position.
3.3 DALI RUBIKORE ON-WALL and RUBIKORE CINEMA
DALI RUBIKORE ON-WALL is optimised for wall-mounting (see Figure 5) but can also
be used on a shelf or on a TV furniture. DALI RUBIKORE ON-WALL can be used as
a left, right, centre or surround loudspeaker in either horizontal or vertical position.
The rotatable DALI Hybrid Tweeter allows the RUBIKORE CINEMA and RUBIKORE
ON-WALL to be installed in either horizontal or vertical orientation, making it possible
to use the exact same loudspeaker for front and centre applications – just like in the
mixing studio.
The Hybrid Tweeter module should be rotated so that the planar tweeter unit stays
vertical (upright), which is important to preserve the wide horizontal dispersion and
fine detail of the high frequencies.
The RUBIKORE CINEMA is designed for home theatre front and centre channel
roles, either stand mounted or sitting on a shelf.
8