Publicidad
EN
SWITCHING ON THE GRINDER
3.3
Press the button (4) to switch on the grinder (the display is switching on).
At first, the grinder is set in the mode originally set by the company. Then, it will
always keep the same mode previously set before switching off.
When you switch it on, the operation screen will appear on the display.
GRINDING REGULATION
3.4
To set the grinding, use the regulation knob (3), turning it clockwise to grind finer or
counterclockwise to grind it coarser (like displayed on the knob). There is no block;
grinding regulation must be gradually performed, grinding a little bit of coffee each 2
steps maximum.
ATTENTION
If the knob is turned a full round when the motor is not working, the grinder can
stop
REGULATE THE FILTER HOLDER FORK
3.5
The fork is suitable to all filter holders in the market.
• Loosen manually the fork regulation knob (9).
• Raise or lower the fork depending on the filter holder size (Fig.8).
• Once you find the right position, tighten the fork regulation knob (9).
43
Publicidad
