BS POOL PC Smart + Manual De Usuario página 28

This allows you to use an external device to program filtration cycles, such as a Touch Evo unit
or a home automation system like Eypools from BSPOOL.
Please carefully check the following diagram, which shows a connection example alongside a
Touch Evo unit.
- The AC inputs (PC-Smart+ and Touch Evo) are directly connected to the mains.
- The Temp input is connected to the temperature probe (optional).
- The Remote input is connected to the auxiliary relay of the external device (chlorinator,
home automation system, etc.).
- The Pump output is connected to the power terminals of the single-phase pump.
- The Chlorinator output is connected to the Filtr. input of the chlorinator. That will enable the
chlorine production since the pump is running.
- The Aux output is a 230V.
Fig. 4: Example of remote connections.
28