Riccar R21 Manual Del Propietário página 14

PROBLEM SOLVING GUIDE
Removing Clogs
CAUTION: Disconnect the vacuum
cleaner from the electrical outlet before
cleaning nozzle housing.
The nozzle hose, located on the back
of the vacuum, carries the dirt from
the nozzle to the vacuum bag. The
hose also functions as the attachment
cleaning hose. First check to see that a
bag is installed or that the bag has not
broken open.
01
Suction Control Dial - pull out and
rotate open.
02
Hose cuff - at the nozzle inlet.
03
Nozzle inlet tube – remove the bottom
plate to check for a clog.
Thermal
Reset
If the Thermal Motor
Protection System shuts
off your vacuum, follow
these steps.
01
Unplug the vacuum.
02
Inspect the vacuum for a full
bag condition or a hose clog
and correct the problem.
03
Locate the Thermal Motor
Protection Reset Button on
the back of the vacuum.
Press the button and
resume vacuuming.
14
B503-21OM.indd 14 B503-21OM.indd 14
Suction Control Dial
Hose Cuff
Inlet Tube
11/2/2023 1:52:18 PM 11/2/2023 1:52:18 PM