Parrot SOUND SYSTEM Manual Del Usuario página 7

PLACING THE SPEAKERS
Wall-mounted:
• Use the bracket and the two screws supplied. Do not forget to stick the adhesive
pads to each speaker.
Placing on the floor
• Stick the four adhesive pads beneath each speaker.
Adhesive pads
• Use the RCA socket to connect a device (Discman, MP3 player, hi-fi...)
• Connect the RCA cable to one of the speakers - the music will be sent by Bluetooth
to the other speaker.
Adhesive pads
• The RCA socket is active when no Bluetooth device is connected.
first device to be connected and active (i.e. playing the music) will take priority. For
example, while you are listening to music by Bluetooth, you will not be able to use the
device on the RCA socket. You must first stop streaming from the Bluetooth device to
free up the speakers and you can then use the device connected to the RCA socket.
If you are using the RCA socket, you must stop using the device before you can start
streaming by Bluetooth.
Parrot SOUND SYSTEM
USE WITH THE RCA SOCKET
• Note: if you are using the Bluetooth feature and RCA socket at the same time: the