Parrot SOUND SYSTEM Manual Del Usuario página 9

UPDATING
You can update the speakers by Bluetooth. The update protocol is secure. Download
the flash utilities from our website at www.parrot.biz/www.parrotsound.com. Both
speakers must be updated one after the other to complete the process. Updating
increases compatibility with more source devices.
TROUBLESHOOTING
PROBLEM
• No sound is coming - Check that the speakers are plugged in.
through the speakers. - Check that your source device supports the Blue- -
tooth A2DP profile and the source role.
- Check that you are not in degraded mode (the
LED is red).
• Sound is only coming - The distance between both speakers must be less
through one speaker. than 10 m.
- Reposition the speakers and press the button
to start the auto-setup mode.
- If the problem persists, one of the speakers might
be faulty. Contact your retailer.
• I cannot connect my - Press the button to allow connection with
source device. the system.
- Hold down the button for two seconds to
reset the speakers.
• Sound only comes - Check that the sound level of the device connec- -
through one speaker when ted is not too low.
I use the RCA socket. - Check that you are not already connected to a
Bluetooth source.
SOLUTION
Parrot SOUND SYSTEM
- Check that you have properly connected the
• I have connected my hi-fi,
RCA sockets on the speakers.
but there is no sound.
- Check that you are not already connected to
another source, where priority is given to the
Bluetooth device.
HOTLINE
Our hotline is at your disposal. You can contact us by email or telephone.
• Europe: +33 (0) 1 48 03 60 69
• UK: +44 (0) 870 112 5872
• USA: (877) 9 PARROT (toll-free)
• Germany: +49 89 590 820 75
Check out our website at www.parrot.biz/www.parrotsound.com for further details.
SPECIFICATIONS
Buttons:
• Short press of : enables a device to be paired.
• Long press of : reconfigures the system. All paired devices are deleted.
• Volume / : volume adjustment from the speakers.
• Long press of : mutes the sound.
Speakers:
• Built-in stereo codec.
• Bluetooth 2.0 EDR module (compatible with Bluetooth 1.2).
• 32 Mbit flash memory, 64 Mbit SDRAM.
• Two drivers: one midbass and one tweeter.
• Built-in stereo audio amplifier: 2 x 60 W.
• Frequency range: 50 Hz – 20 kHz.
• Power supply: 110/220V (automatic voltage selector).
• Bi-amplification.
• Parrot 32-bit DSP technology.
• 32-bit digital sound processing.
• Crossover: 7 dedicated crossover filters.