Betzold 760932 Instrucciones página 13

VI. Recording and play back
Switch on the recording microphone, by keeping the
1
ON / OFF button pressed until the status LED lights green. This
indicates that the recording microphone is in the standby mode.
Then press the red recording button and release it again.
2
The status LED changes to red. This indicates that the recording is
running.
Speak or sing loudly and clearly for at least 2 seconds into the
3
upper end of the microphone.
4
To stop the recording, press the red recording button again.
The recording is being saved. The status LED lights green again (continuously).
Art.-Nr. 760932
Press the blue play back button, to play back your song.
5
The status LED lights green during the play back of the song.
6 As soon as the play back is completed, the microphone returns to
the standby mode and the status LED light is green.
Please note: The recording microphone does not save any recor-
7
dings of less than 2 seconds.
13
© Arnulf Betzold GmbH