Descargar Imprimir esta página

Hkoenig warm110 Manual De Instrucciones página 4

Radiador de bano de aceite

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
31 The device must not be used if it has been dropped,
it obvious signs of damage are visible or if it has leaks.
SAFETY SWITCH
Your radiator has a safety switch which turns off the
electricity as soon as the device falls over . The safety
switch prevents dangerous situations caused by
overheating.
CLEANING YOUR OIL-FILLED HEATER
1
Always disconnect the heater from the mains supply
before cleaning.
2
Clean the outside of the heater by wiping with a
damp cloth and buff with a dry cloth.
3
DO NOT use waxes or polishes as these may react
with the heater and cause discoloration.
STORING YOUR OIL-FILLED HEATER
1
Save the box for off season storage.
2
Clean the heater following the cleaning instructions
above.
3
Remove the wheel base assemblies.
4
Place the heater, and wheel assemblies in the
original box, and store in a cool and dry place.
5
If you choose to store your heater fully assembled
be sure to cover it to protect it from dust.
Remove the heater and all the accessories from the carton.
1
Turn the heater upside down.
2
Position the wheel base assembles between the end fins.
3
Attach them to the heater using the U-bolls and wing nuts supplied.
4
Tighten the wing nuts.
5
Turn the heater the right way up.
6

Publicidad

loading