Baby Trend Sit N'Stand Double 2.0 SS28 A Serie Manual De Instrucciones página 14

Idiomas disponibles

Car Seat Connections:

Recline both seats as shown on step 11. Align the car

seat connection to the stroller connectors. Both car

seats must be rear facing.

Carefully rest the car seats lower rear against the angle

point of the tray. Latch the connection into the stroller

frame. Press down firmly for the click.

ALWAYS ensure that the car seat is properly connected

and locked onto the stroller before each use by lifting

up on the car seat handle (Fig. 12a).

Rear

"Click"

Front

Lower rear

Angle point

"Click"

Fig. 12a

IMPORTANT:

REAR SEAT: Always use short clips to secure the infant car seat to the

stroller. (Fig. 12b). NOTE: Thread between canopy and stroller frame to

attach. Reverse to remove and store in the side pocket.

Removing the car seat:

NOTE: Set handle to the carry position (Fig. 12c). Squeeze the release

handle located at the Top-rear of the car seat and lift away from the stroller

(Fig. 12d). Applies to both front and rear.

Press

Fig. 12c

Fig. 12b

Fig. 12d