Publicidad
Idiomas disponibles
Idiomas disponibles
Get the cross bar through the
rear wheel and insert the second
washer (Fig. 3c).
Place the pin horizontally into the
hole of the axle bar and then rotate
into a vertical position (Fig. 3d).
(1)
Align the tabs on the cap with
(2)
the holes on the wheels.
the cap into the wheel to close the
axle assembly.
NOTE: Press firmly with your
palm to press the cap in
completely (Fig. 3e).
Repeat for the other side.
Align
1
7
Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 3c
Push
Fig. 3d
2
Fig. 3e
Before assembling the rear axle,
pull off the protective caps from
the stroller frame's rear legs
(Fig. 3f).
Place the rear legs over the axle
with wheels and apply pressure on
both sides. Ensure both sides lock
into place (Fig. 3g).
NOTE: Pull on the front and rear
wheels to ensure all are securely
attached to the stroller. NEVER
use stroller if wheels do not lock
into place. If you need assistance,
please contact our customer
service department at 1-800-328-
7363, Monday-Friday, between
8:00 a.m. and 4:30 p.m. PST. www.
babytrend.com/contact-us
Fig. 3g
Copyright © 2024, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 3f
8
Publicidad
