Publicidad
Idiomas disponibles
Idiomas disponibles
Item:
OS-PIR-UNV
INSTALLATION INSTRUCTIONS
Wiring Diagram:
120-277Vac
120-277Vac
Installation Instructions:
1. Turn off AC power at the circuit breaker before beginning any electrical work.
2. Remove the nut from the bottom of the sensor.
3. Select an available fixture knockout to mount the sensor, making sure to avoid restricting the sensor's
field of view.
4. Route the sensor wires through the knockout, and thread the wires through the nut.
5. Tighten the nut onto the sensor.
6. Connect the wires according to the Wiring Diagram above.
www.topaz-usa.com | 800.666.2852 | ©2023 Southwire Company, LLC. All rights reserved.
OCCUPANCY SENSOR
Cap dimming wires separately.
Publicidad
