Publicidad
Idiomas disponibles
Idiomas disponibles
Storage
Follow the steps below to prepare the electric wood chipper +
shredder for storage:
1. Disconnect the power supply to the wood chipper +
shredder.
2. Clean the wood chipper + shredder with a damp cloth or
hand brush.
3. Inspect the wood chipper + shredder carefully for worn,
loose, or damaged parts. Check connections and screws
and tighten if necessary. Pay special attention to the blade
and replace if it shows signs of wear. Refer to the Care +
Maintenance section.
4. Store the wood chipper + shredder indoors in a dry, clean,
and cool area out of the reach of children. Do not store the
unit next to corrosive materials, such as fertilizer and rock
salt.
5. Wipe the extension cord to remove any foreign substances,
such as oil or stains. Replace the extension cord immediately
if it is cut or damaged in any way.
6. Do not cover the wood chipper + shredder with a solid
plastic sheet. Plastic coverings trap moisture around the
shredder, which can damage the unit.
Service + Support
If your Sun Joe
®
electric wood chipper + shredder requires
service or maintenance, please call the All Season Power
customer service center at 1-866-225-9723.
Model + Serial Numbers
When contacting the company or reordering parts, you will need
to provide the model and serial numbers of your product. These
are found on the decal affixed to the housing or handle of your
electric wood chipper + shredder. Copy these numbers into the
space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
C J 6 0 1 E
Serial #:
13
Publicidad
