Moulinex Cookeo Touch CE9028CH2 Manual De Instrucciones página 32

• error 15
decompression fault:
- unplug the Cookeo Touch,
- leave to cool,
- remove the metal lid,
- correctly position
the ball cover.
• error 16
the Cookeo Touch
doesn't build up pressure:
- add water to the bowl,
- resume cooking.
• error 17
the Cookeo Touch
pressure fails to raise.
See page 56
"The Cookeo Touch pressure fails
to raise and steam is not being
released properly".
60
• error 18
failure to detect the
locking rod.
• error 101, 106
display or recipe
loading error:
Unplug and restart the appliance.
If the problem persists, take
your appliance to an
Approved Service Centre.
For all problems,
unplug the Cookeo Touch.
If the problem persists,
contact an Approved Service Centre.
If you experience
connection problems,
visit
www.moulinex.com or
the Moulinex app.
Your Cookeo Touch model :
SERIE EPC13
Technical information about your
Cookeo Touch:
Low pressure: 40kPa (109°c)
High pressure: 70kPa (115°c)
Very high pressure: 100kPa (119°C)
PS = 140kPa
Cookeo Touch capacity: 6L
Usable capacity: 4L
Built-in heater:
enclosed heating resistor.
A beep signals that
operating pressure has been reached.
WiFi:
Maximum transmitted power:
20dBm, 100mW
Frequency: 2,4GHz
Power consumption in standby
mode: 0.28W
Power consumption in networked
standby mode : 0.28W
What do Cook4me Touch Wifi
pictograms mean ?
• Product connected to the Wifi
• Product connected to the Wifi
but not connected to Moulinex
database
• Product not connected to
the Wifi
61