auronic AU3260 Manual De Instrucciones página 26

Note
Use a power adapter to charge the product. The power adapter is not included.
◊
Press the power button briefly to view the battery status when the product is off.
◊
3.3 Playing music via Bluetooth
1. Press and hold the power button for 2-3 seconds until the indicator light flashes blue rapidly.
2. Turn on the Bluetooth function on your mobile device or other suitable device and connect
to 'Auronic Boombox'.
3. If a code is referenced enter '0000'. If the connection is successful, the indicator lights will
turn solid blue.
4. Play your music on your paired device. The sound will be played through the product's
speaker. You can control the music on your paired device or with the control buttons on the
product.
Note
To reset the product (to clear the pairing list or any program errors), use a straightened
◊
paper clip or a toothpick to gently press the reset pad briefly.
The product automatically turns off after 10 minutes in pairing mode if no device is paired.
◊
If your paired device is turned off or manually disconnected, the product will switch to
◊
pairing mode and automatically turn off after 10 minutes.
If the product or connected device goes out of blutetooth range, the product disconnects.
◊
The connection to the last connected device is restored once you are within bluetooth
range again within 10 minutes. To connect to another device, repeat the pairing steps.
3.4 Playing music with an audio cable
1. Connect the audio cable to the product's AUX port and to your computer, laptop or other
suitable device.
26