auronic AU3260 Manual De Instrucciones página 27

2. If the product is turned off: Press and hold the power button for 2-3 seconds until the
indicator light turns solid green.
3. Play your music on your connected device. The sound will be played through the product's
speaker. You can control the music on your paired device or with the control buttons on the
product.
Note
The product disconnects from your mobile device or other paired device when an audio
◊
cable is connected to the audio input.
While playing audio through the audio input, press volume +/- to adjust the volume and
◊
briefly press play/pause to pause or resume. The previous/next track control on the speaker
is disabled in audio input mode.
Some computers may require opening the audio control screen to manually set the product
◊
as the default audio device.
3.5 Playing music with a TF card
1. Insert a TF card into the TF card reader of the product.
2. If the product is turned off: Press and hold the power button for 2 to 3 seconds until the
indicator light turns solid green.
3. Play your music on your connected device. The sound will be played through the product's
speaker. You can control the music on your paired device or with the control buttons on the
product.
3.6 Powerbank function
1. Connect your mobile device to the product's USB-C charging port with an appropriate
charging cable.
2. Your mobile device will start charging.
Note
Please note that the battery life of the product will be reduced if you charge your device
◊
while also listening to music.
Your mobile device will only charge when the product is turned on. Once you turn off the
◊
product, charging of your mobile device will stop.
3.7 Adjusting sound effect
Short press sound effect button (3) to switch between indoor and outdoor mode.
English
27