Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
* An accurate maintenance guarantees good fun-
ctioning and long-lasting performance.
1
* An accurate maintenance guarantees good fun-
ctioning and long-lasting performance.
* Particular care is due to the grease filter panel.
It can be removed by pushing its special handle
toward the back-side of the cooker hood and tur-
ning the filter downwards so to unfasten it from
its slot.
To insert the filter just perform the opposite ope-
ration.
After 30 hours working (model), the push button
control panel will signal the saturation of the grea-
se filter by lighting all the buttons. Press the timer
button to reset
.
The grease filter needs cleaning by regular hand-
washing or in dishwashers every two months at
least or depending on its use.
* In case the appliance is used in its filtering ver-
sion, the active coal filter (Fig. B) needs to be
periodically replaced. The coal filter can be re-
moved by removing the grease filter first (Fig. A),
and by pulling its special plastic tongue until it is
unfastened from its slot. Re-insert the coal filter
by operating in the opposite way. The coal filter
needs replacing depending on the use, but howe-
ver every six months at least.
* To clean the appliance itself tepid water and
neutral detergent are recommended, while abra-
sive products should be avoided. For steel ap-
pliances specialized detergents are recommen-
ded (please follow the instructions indicated o the
product itself to obtain the desired results).
LED BAR REPLACEMENT
Remove the grease filter and put pressure on the
led bar placed in the internal part of the built-in
hood until you can unhook the springs, then di
sconnect the connector and replace the bar with
a similar one.
* If the supply cord is damaged, it must be
replaced by the manufacturer or its sevice
agent or a similarly qualified person in order
to avoid a hazard.
B
A
22
Publicidad
