Publicidad
ENGLISH
INS TRUCTION MANUAL
CONTENTS
INTRODUCTION ..................................... 1
DEVICE OVERVIEW ................................ 2
RF MONITOR OPERATION .................... 2
EXPOSURE LOGGING ............................ 3
VOICE NOTES ......................................... 4
INTRODUCTION
The fieldSENSE 2.0 is specifically
designed to protect personnel
working near broadcast and
telecommunications antennas from
EMF/RF overexposure.
The fieldSENSE 2.0 measures both
the E- and H-fields, spanning from 50
MHz to 6 GHz with an isotropic probe
architecture that works for both near-
and far-field conditions. The probe
response is shaped to ensure that all
sources of concurrent radiation are
individually assessed and weighed
against the safe working limits and
THIS DEVICE IS ONLY TO BE USED BY RF TRAINED PERSONNEL WITH
A COMPLETE UNDERSTANDING OF THE RISKS INVOLVED WITH
WORKING WITH RF AND THE NECESSARY PRECAUTIONS TO BE
TAKEN. ONLY USE THIS DEVICE WITHIN THE LIMITS OF THE DESIGN
SPECIFICATIONS. ENSURE THAT IT IS NOT DAMAGED PRIOR TO USE.
FALL DETECTION & ALARM ................. 4
REPLACING THE BATTERIES ............... 5
HARNESS ATTACHMENT ..................... 5
SPECIFICATIONS ................................... 6
REGULATORY COMPLIANCE ............. 66
then combined to provide the total
exposure as a percentage of the
occupational limits.
Used correctly, the device will give an
indication of field levels approaching or
exceeding associated exposure limits
so that corrective action can be taken.
Always ensure the device is within
its 2-year calibration cycle and
discontinue use if it appears to be
damaged.
1
Publicidad
