Publicidad
VOICE NOTES
The fieldSENSE 2.0 is capable of
capturing voice notes, which are paired
with the measured data.
To start recording switch the device
‚
on and double press the power
button.
The Audio Recording LED will
‚
illuminate while the recording is in
progress.
FALL DETECTION & ALARM
The fieldSENSE 2.0 is equipped with a
tri-axis accelerometer which is able to
detect if the device experiences a fall.
This is immediately activated
‚
when the device is switched on, and
should the device detect a fall of
approximately 2m it will alarm.
REMOVING THE BATTERIES FOR AN EXTENDED PERIOD OF TIME WILL
CAUSE THE INTERNAL CLOCK TO LOSE ITS TIME SETTING. THIS IS
CORRECTED BY PLUGGING IT INTO THE USB CONNECTION ON A PC
4
‚
‚
‚
‚
‚
‚
RUNNING THE FIELDSENSE APP.
Speak directly into the front of the
device slowly and clearly for best
performance.
A single short press of the power
button will end the audio recording
session, but the RF monitor remains on.
Voice notes can be downloaded from
the fieldSENSE 2.0 using the app
available from www.fieldsense.com.
The alarm can only be cleared by
switching the device off.
This is to draw attention to a climber
who may be in need of support.
The alarm, if uncleared, will continue
until the batteries are exhausted.
Publicidad
