Publicidad
Idiomas disponibles
Idiomas disponibles
Daily Checklist, Cleaning
and Storage
Daily Checklist
To help maintain your electric pole chain saw for optimum
performance, we recommend you complete this checklist prior
to each work session.
m
WARNING!
Do not plug in the power cord until you have
completed all of the daily checks.
• Inspect for any visible damage to the chain, guide bar, or
motor housing.
• Inspect the oil port and guide bar rails and clean them to
remove any debris.
• Check the chain tension.
• Check the chain teeth for sharpness.
• Check the bar and chain oil level; fill with only new chain oil
specifically formulated for chain saws.
NOTE: If you notice anything unusual, such as a vibration or odd
sound, shut the saw OFF immediately. Remove the power cord
and check the saw for any damage.
If you cannot find the cause of the problem or are uncertain
what to do, then have the saw inspected by an authorized
All Season Power dealer or call the All Season Power customer
service center at 1-866-225-9723 before using it.
m
CAUTION!
• Remove the power cord and wait at least five minutes for the
saw to cool before servicing or storing your unit.
• If you drop the saw, carefully inspect it for damage. If the
guide bar is bent, the housing is cracked, the handle is
broken, or if you see any other condition that may affect
the saw's operation, DO NOT USE the tool. Instead, have it
serviced at an authorized All Season Power
dealer or call the All Season Power customer service center
at 1-866-225-9723.
Cleaning
Use only mild soap and a damp cloth to clean the pole chain
saw. Never let any liquid get inside the motor housing and
NEVER immerse any part of the saw housing in liquid.
Storage
• Ensure that the guide bar cover is in place when storing.
• Do not store the pole chain saw near chemicals, such as
fertilizers or other harsh solvents. Do not expose the plastic
parts of the unit to brake fluids, gasoline, petroleum-based
products, penetrating oils, or the like. These products are
often highly corrosive and may cause permanent damage,
weaken, or destroy the plastic parts of your pole chain saw.
• When not in use, your electric pole chain saw should be
stored indoors in a dry and high or locked-up place, out of
the reach of children.
Support
If your Sun Joe
®
SWJ803E electric pole chain saw requires
service or maintenance, please call 1-866-225-9723 for
assistance.
Model and Serial Numbers
When contacting the company, reordering parts, or arranging
service from an authorized dealer, you will need to provide the
model and serial numbers, which can be found on the decal
located on the housing of the unit. Copy these numbers into the
space provided below.
Record the following numbers from the housing or handle of your
new product:
Model #:
S W J 8 0 3 E
Serial #:
16
Publicidad
