Publicidad
Idiomas disponibles
Idiomas disponibles
Unpacking
Carton Contents
• Electric blower
• Rear blower tube
• Front blower tube (located inside rear blower tube)
• Manual with registration card
1. Carefully remove the electric blower and check to see that
all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center at
1-866-225-9723.
NOTE: Do not discard the shipping carton and packaging
materials until you are ready to use the electric blower. The
packaging is made of recyclable materials. Properly dispose
of these materials in accordance with local regulations.
IMPORTANT! The equipment and packaging materials are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
m
WARNING!
To avoid serious personal injury, read and
understand all safety instructions provided.
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
m
WARNING!
Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
Attaching the Blower Tube
1. Align the grooves on the front blower tube with the grooves
on the rear blower outlet. Push the front blower tube onto
the rear blower outlet until it snaps into place (tube is
secured by release button) (Figs 1 & 2).
Fig. 1
Rear blower outlet
2. Fit the blower tube onto the motor housing (Fig. 3).
3. Push the blower tube onto the housing and depress the
Front blower tube
7
Fig. 2
Release button
Fig. 3
locking button and slide the tube until the lock button sets
into hole (Fig. 4).
Fig. 4
Publicidad
