6. CARE & CLEANING
6.1 GENERAL RACCOM ANDATIONS
Regular cleaning can extend the lifecycle of your appliance.
Clean the hob after each use;
Always use cookware with a clean base;
Scratch on the surface have no effect on how the operates;
Use a special cleaner suitable for the surface of the hob;
Use a special scraper for the glass.
6.2. CLEANING THE HOB
Before proceeding with the cleaning, make sure that the cooking zones are turned off. Always remember to
follow the recommended cleaning instructions and avoid using abrasive products that could damage the
surface of the cooktop.
a) FATTY SOIL
This produre is recommended for these kind of scenarios; splatters caused by frying or grilling meat.
Let the hob cool down.
Absorb any excess liquid around he pot with kitchen paper, then remove the pot.
Clean the cooking surface with a cloth and detergent solution.
If necessary, clean the hob a second time using hot water and cleaner for induction hob glasses.
b) SUGARY SOIL
This procedure is recommended for foods that, due to their high sugar content, need to be promptly removed to
prevent damage to the hob surface (syrups,jams, or preserves).
When the hob is still warm, absorb any excess liquid around the pot with kitchen paper, then remove the pot.
If necessary, we recommend using a scraper at an acute angle to remove any remaining residue.
Clean the cooking surface with a detergent solution and dry it with the kitchen paper.
If necessary, clean the hob a second time using hot water and cleaner for induction hob gasses.
c) STARCHY SOIL
This cleaning procedure is recommended for these kinds of foods: pasta, rice and potatoes.
Absorb any excess liquid around the pot with kitchen paper, then remove the pot.
Let the hob cool down.
Use a damp cloth to moisten any starch residues. Allow it to sit for a couple of minutes.
Clean the cooking surface with a cloth and detergent solution.
After cleaning, wipe the hob dry with a soft cloth.
If necessary, clean the hob a second time using hot water and cleaner for induction hob gasses.
NOTE: Please consider these instructions also for; water rings, limescale rings, fat stains.
d) SHINY METALLIC DISCOLORATION
Use a solution of water with vinegar and clean the glass surface with a cloth.
22