Publicidad
Idiomas disponibles
Idiomas disponibles
Using your remote
Code identification
SETUP
ENTER
1
1
2
2
4
4
5
5
7
7
8
8
0
0
ENTER
Reset to factory
SETUP
0
0
SRP4229B_07 ENG Manual v2.indd 11
SRP4229B_07 ENG Manual v2.indd 11
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the desired device
button (TV, DVD, STR, AUD) you
would like the code for.
3. Press and release the ENTER button.
4. Press and release the #1 button.
Count the number of times the
3
3
remote light flashes. This is the
6
6
number corresponding to the first
digit of the code. Repeat the process
9
9
by pressing the #2, #3 and #4
buttons for the remaining digits.
5. Press and release the ENTER button
to exit this mode.
settings
1. Press and hold down the SETUP
button on the remote until the red
light on the remote control turns on.
Release the SETUP button. The red
light will remain on.
2. Press and release the MUTE button.
3. Press and release the number #0
button. The red indicator light will
flash twice.
11
9/2/21 5:03 PM
9/2/21 5:03 PM
Publicidad
